Prefabricated offices and changing rooms in Bio Oils

Vestuarios en Málaga para Bio Oils : Balat

Information

Costumer

Bio OILS

Use

-

Dimension

-

Locality

-

Time

-

Are you interested in a similar project?

Request a quote

About the project

Prefabricated offices and changing rooms in Málaga

The Bio Oils factory has asked us to install several prefabricated modules in its facilities in Malaga. These modules will perform both office functions and prefabricated changing rooms for factory staff and operators at a time when they need.

The first part of the project is a stacked module of 6 4.80 outside the factory. This module will serve as offices and has been elevated in two heights. Access to the upper part is via a staircase on the side of the assembly and the interior is completely diaphanous. Both the colour of the profile and the coating are white.

In the contiguous part are extended three blocks composed of two modules each that act as prefabricated dressing rooms.  These sets have exterior lattice windows by being at low height.

Everything is connected to the electricity grid and they have cold heat appliances to heat the rooms. We will be placing more photos of the interior of the project.

We hope you like it!

Facilities for Cruz Roja Alicante

Information

Costumer

Cruz Roja

Use

Sanidad

Dimension

-

Locality

Alicante

Time

-

Are you interested in a similar project?

Request a quote

About the project

Facilities for Red Cross in Alicante.

We have developed a new modular hospital project in Alicante. This modular hospital is really a multifunctional workplace. The compound will serve as a base for volunteers and also as a primary care centre in spacious rooms. Changing rooms have also been equipped with showers. All rooms are connected.

Within what is the modular set we have created different rooms commonly used by the corporation. Diaphanous spaces where will be the center of operations and care, a medicalized care area where boxes and stretchers have been installed. To give a personalized touch to the environment, the window curtains are the corporate red color of the organization. Large waiting rooms and training classrooms for Red Cross professionals have also been created in addition to a reception area.

In addition to these two main areas, the modular design has two other well-differentiated spaces. The first is a warehouse that is also connected to the medicalized zone. As an important part of the set stand out the changing rooms showers and lockers that will be installed for all the equipment. A separate area for staff changes and local Red Cross volunteers.

The entire modular complex has been made with Sandwich Panel and is perfectly insulated from the outside. On the ground it has risen to save the irregularities of the floor. Access is from one of the lateral areas where a ramp has been enabled to improve accessibility to the center.

Aesthetically, the white color of the modules’ panel is maintained, however, we wanted to add a touch of color with the red profiles.

The modular assembly is connected both to the electrical and power grid to have light and electricity in medical and computer devices and to the water and sanitation network to ensure hygiene. In addition, air conditioners have been installed on top of the modular assembly to relieve high temperatures.

Prefabricated hospital in Spain

Information

Costumer

-

Use

-

Dimension

-

Locality

MÁLAGA

Time

-

Are you interested in a similar project?

Request a quote

About the project

Interior of the hospital La Axarquia that we are riding in Vélez, province of Malaga

We started the year with this prefabricated hospital project in Andalusia. In this case, we have developed a part of a two-storey hospital as an extension of the existing center in La Axarquia in order to prevent an increase in traffic in the coming months.

The project itself is completed in terms of indoor facilities where it is prepared in terms of lighting, mains power, computer equipment and water network connections. It remains to be finished, and we will show you when the outer lining is done, for which the guide profiles have already been placed.

Inside we find the diaphanous rooms and perfectly prepared to receive all the material. Prepared stairs, waiting rooms and consultations. We will continue to report on the project and the final external result.

.

Prefabricated classrooms CEIP Angel Nieto

CEIP Ángel Nieto Madrid

Information

Costumer

CEIP ANGEL NIETO

Use

COLEGIO

Dimension

-

Locality

-

Time

-

Are you interested in a similar project?

Request a quote

About the project

Prefabricated classrooms for school in Madrid

We invite you to know this work of prefabricated classrooms that we developed at the CEIP Angel Nieto, in Madrid. In this case, it is the extension of a school to address the growth of the number of students and the measures of distancing for the COVID era.

In this case, we have placed the classrooms on the right side of the covered corridor that existed for access to the old building. This corridor had a certain inclination that had to be saved and corrected in the accesses and in the placement of the modules. Access to the prefabricated classrooms is by this same covered walkway.

As for the exterior of them, a metal coating has been placed that isolates and gives robustness to the set. Facing inside we have doors and to the other side windows to access natural light. The competo complex is also connected to the electricity supply that feeds the artificial lighting equipment placed, school and school equipment and air conditioning devices to make the classrooms comfortable.

We hope you like it!

German School Marbella

Colegio prefabricado en Marbella : Balat

Information

Costumer

Colegio Alemán

Use

-

Dimension

-

Locality

-

Time

-

Are you interested in a similar project?

Request a quote

About the project

Expansion of the German School of Marbella with prefabricated modules

We have completed the expansion of the German school in Marbella. In this project, we have worked on creating two blocks of classes that rise in height side by side. Each set is composed of 10 prefabricated modules so a large capacity of classrooms has been created inside.

On the outside, the factory-made prefabricates are white, with the profiles in the same color. Access to the classes is by a front and access to the top is by a staircase on the outside in black. On the outer side we can see the air conditioning devices that help to air-condition the rooms.

The entire prefabricated extension is connected to the electricity grid and the sewerage system. Feeding the air conditioning and lighting equipment

We hope you like it.

Prefabricated offices Ingeperfil

Oficinas en Ingeperfil : Balat

Information

Costumer

Ingeperfil

Use

-

Dimension

-

Locality

-

Time

-

Are you interested in a similar project?

Request a quote

about the project

Prefabricated Offices in Barcelona

We have developed this work of prefabricated offices for the IngePerfil company in Barcelona.  Ingeperfil, a company specialized in the manufacture of metal profiles for partitions and dry construction is one of the national benchmarks in the production of profiles for dry partitions.

On this occasion we have assembled several prefabricated modules for the creation of prefabricated offices that extend in the camp. Six modules to create different rooms for various needs arising from the need for more space in the current offices. In the left part of the work a warehouse and a closed module with independent access composed of two huts are created.

The rest of the four houses make up of open-plan prefabricated offices accessed by a front door also glazed. The offices are very bright since in this front the windows occupy more than 50% of the surface of the facade with folding sheets.

Inside everything has obviously been arranged for a perfect operation connecting the prefabricated offices to the power network of the company. Ceilings and lighting have been placed and also an air conditioning installation that makes the stay more comfortable. Soon it will be completely finished.

We hope you like it!

Prefabricated offices in Barcelona

Insralación Garita Oficinas prefabricadas en Barcelona : Balat

Información

Uso

OFICINAS

Dimensión

2 ALTURAS

Localidad

Barcelona

Tiempo

TEMPORAL

¿Estás interesado en un proyecto similar?

Pedir presupuesto

Sobre el proyecto

Oficinas prefabricadas con intersección y a dos alturas en Barcelona

Hemos desarrollado este trabajo de oficinas prefabricadas en Barcelona. Estas oficinas prefabricadas se han colocado en el exterior de una nave industrial en Barcelona y se han construido a dos alturas con un módulo de 6+6.

Para la realización del trabajo en primer lugar ha sido necesaria la cimentación del suelo para ponerlo a la misma altura y dar un terreno sólido a una edificación importante. Se han creado dos espacios a dos alturas. Ambos con seis módulos. El acceso se realiza por el frontal a la parte inferior y a la superior por una escalinata en la parte intermedia que llega a un puente que une ambos módulos.

Los prefabricados se han dejado en el color blanco original manteniendo ese mismo color la perfilería del conjunto. En el interior se crean diferentes tipos de estancias, oficinas y espacios, además de tener baños y aseos, por lo que el módulo está conectado a la red de saneamiento así como a la eléctrica para alimentar todos los recursos informáticos, de iluminación y climatización.

Esperamos que os gusten estas nuevas oficinas prefabricadas, cuando el trabajo esté terminado os mostraremos imágenes del interior.

 

En la parte intermedia se ha creado  una escalinata en el Sg.

Contacto

Balat se compromete a procesar y utilizar sus datos personales únicamente para dar respuesta a su solicitud. La base que legitima el tratamiento de los datos personales es su consentimiento expreso. Igualmente, sus datos se conservarán durante el periodo que sea necesario para dar respuesta a su solicitud. Ver la política de privacidad.
Para poder recibir novedades sobre productos y servicios, así como ofertas comerciales, Balat solicita su consentimiento explícito. Siempre podrá darse de baja de estas comunicaciones según nuestra política de privacidad.

Prefabricated offices for Sorigué

Oficinas prefabricadas para Sorigué : Balat

Información

Cliente

Sorigué

Uso

-

Dimensión

-

Localidad

-

Tiempo

-

¿Estás interesado en un proyecto similar?

Pedir presupuesto

Sobre el proyecto

Oficinas Prefabricadas en Tarragona

En Balat hemos desarrollado este trabajo de construcción modular de oficinas prefabricadas para Sorigué en Tarragona. Unas oficinas que se adaptan a las instalaciones de la empresa y que culminarán un gran trabajo de dos plantas y gran cantidad de metros cuadrados de nueva creación.

Las oficinas prefabricas se sitúan en la campa de la empresa en un fondo pegadas al muro que las delimita en la parte trasera. Por la parte frontal se realiza el acceso principal a través de una escalinata de hormigón y una pequeña rampa. En la parte exterior, podemos ver el logotipo de la empresa destacando en el revestimiento de color gris que hemos colocado (podéis ver una foto de la perfilería antes de la colocación en la galería). En la parte lateral, se puede acceder por una cuesta a una ventanilla de información y gestiones rápidas sobre la que se ha colocado un alero para proteger de la lluvia.

En el interior encontramos diferentes espacios y oficinas adaptados a las necesidades del cliente así como instalaciones de baños. Todo el conjunto por tanto está conectado a la red de saneamiento además de a la eléctrica de alimentación. Los aparato de aire acondicionado se han situado en la parte lateral inferior exterior.

Esperamos que os haya gustado este gran trabajo de oficinas prefabricadas de nuestra división de Cataluña.

Changing rooms for desalination plant in Melilla

Planta desaladora en Melilla : Balat

Information

Costumer

-

Use

-

Dimension

-

Locality

Melilla

Time

-

Are you interested in a similar project?

Request a quote

About theproject

Prefabricated changing rooms in Melilla

We have made this modular complex that will serve as prefabricated changing rooms for a desalination plant in Melilla. On this occasion we have created a set of 12x 7.20 to meet all the needs of the company.

The changing rooms rise on the ground on concrete blocks that make on the basis of balance, in addition to avoiding contact with direct water if there is a rise in the tide or excessive waves. In the exterior aspect, we find the basic modules with the white profile and the shuttered windows. You can appreciate the cold-heat appliances, which above all help to cool the stay by the heat of the area.

The whole complex of changing rooms is connected to the electrical and sanitation network for the correct functioning of appliances and sanitary systems.

We hope you like it!

Loading fingers for logistics company

Casteas prefabricadas modulares en Zaragoza

Information

Costumer

-

Use

-

Dimension

-

Locality

-

Time

-

Are you interested in a similar project?

Request a quote

About the project

Logistics company in Zaragoza 

We have developed this good work for a logistics company in Zaragoza. it is two fingers with loading docks for the collection and deposit of the goods by vans and heavy transports.

The two fingers are composed of eleven assembled prefabricated modules that will facilitate the task of daily logistics at the Center. These assembled modules are raised in height to facilitate loading and have been placed lifting doors and adaptation elements for approaching vehicles to the height of load.

All the prefabricated houses are equipped and equipped with electric power that comes from inside the industrial building itself in which a hole is opened that is a corridor with access to both loading and unloading projections.

As for the aesthetic level, the coating of these modules for logistics has been made of dark grey as well as the profiles that assemble the set that looks great with the main colors of the brand highlighted in the central ships, the red and yellow.

We hope you like it!

Balat se compromete a procesar y utilizar sus datos personales únicamente para dar respuesta a su solicitud. La base que legitima el tratamiento de los datos personales es su consentimiento expreso. Igualmente, sus datos se conservarán durante el periodo que sea necesario para dar respuesta a su solicitud. Ver la política de privacidad.
Para poder recibir novedades sobre productos y servicios, así como ofertas comerciales, Balat solicita su consentimiento explícito. Siempre podrá darse de baja de estas comunicaciones según nuestra política de privacidad.
Balat se compromete a procesar y utilizar sus datos personales únicamente para dar respuesta a su solicitud. La base que legitima el tratamiento de los datos personales es su consentimiento expreso. Igualmente, sus datos se conservarán durante el periodo que sea necesario para dar respuesta a su solicitud. Ver la política de privacidad.
Para poder recibir novedades sobre productos y servicios, así como ofertas comerciales, Balat solicita su consentimiento explícito. Siempre podrá darse de baja de estas comunicaciones según nuestra política de privacidad.